Mint Mobile APN Settings for Android: Data and MMS
Mint Mobile’s APN settings for Android use the APN Wholesale, the MMSC http://wholesale.mmsmvno.com/mms/wapenc with MMS port 8080, and the APN type default,supl,mms,ia. Try the shortcut first: text SETUP to 6700 and Mint sends the settings to your phone. If you type them in, keep the MCC and MNC your phone fills in, because Mint’s two official pages disagree on them.

Key takeaways
- Mint’s data and picture-message APN on Android is
Wholesale. One APN covers 5G, LTE and MMS. - Texting SETUP to 6700 from your Mint line is Mint’s own first step, and it saves you typing a long list of fields by hand.
- Mint’s help center says to leave MCC and MNC at their defaults. Its setup page says MCC 310 and MNC 260. Both can be right, depending on your SIM.
- If a Mint APN vanishes the moment you save it, the MNC almost always doesn’t match your SIM.
- Recent stock Android builds may not show MCC, MNC or MVNO fields at all. If yours doesn’t, there’s nothing to set.
Also in this topic: our carrier APN hub starts with AT&T APN settings for Android, which links every carrier we cover.
What are Mint Mobile’s APN settings for Android?
Mint publishes the same core profile on two pages: the APN is Wholesale, MMS goes to wholesale.mmsmvno.com on port 8080, and the login and proxy fields stay blank. Where the pages differ, the table shows both. The middle column is Mint’s Android help center article; the right column is Mint’s Android setup page.
| Field | Mint help center | Mint setup page |
|---|---|---|
| Name | Mint | Mint |
| APN | Wholesale | Wholesale |
| Proxy, Port, Username, Password, Server | Leave blank | Leave blank |
| MMSC | http://wholesale.mmsmvno.com/mms/wapenc | Same |
| MMS proxy | Leave blank | Leave blank |
| MMS port | 8080 | 8080 |
| MCC | Don’t change the default | 310 |
| MNC | Don’t change the default | 260 (with a note about SIM age) |
| Authentication type | Leave blank | Leave blank |
| APN type | default,supl,mms,ia | default,supl,mms,ia |
| APN protocol | IPv4/IPv6 | IPv4/IPv6 |
| APN roaming protocol | IPv4/IPv6 | IPv4 |
| MVNO type / value | GID / 756D | Not listed |
Copy-ready version (help center values, which we recommend):
Name: Mint
APN: Wholesale
MMSC: http://wholesale.mmsmvno.com/mms/wapenc
MMS port: 8080
APN type: default,supl,mms,ia
APN protocol: IPv4/IPv6
APN roaming protocol: IPv4/IPv6
MVNO type: GID
MVNO value: 756D
MCC / MNC: keep what your phone fills in
Everything else: leave blank
Use the help center version. It has the reset step, the MVNO fields and the safer MCC/MNC advice. The roaming protocol only matters when you’re roaming, so the IPv4 vs. IPv4/IPv6 difference won’t affect everyday data. Mint says the fields are case sensitive, so type Wholesale with a capital W and no spaces.
Should you text SETUP to 6700 first?
Yes. Once your plan is active and the SIM or eSIM is in, text SETUP to 6700 from your Mint line. Mint’s internet and picture messaging help page says compatible Android phones get a notification that installs the settings automatically, while other Android phones get a text with manual instructions. Either way, restart the phone afterward and test with Wi-Fi off.
Only type the APN in by hand if no notification arrives, or if data or picture messages still fail after the restart.
How do you add the Mint APN on a Pixel or Galaxy?
Reset first, then add the Mint APN only if data or MMS still fails. Menu names come from Google’s and Samsung’s US help pages and can vary slightly by model and Android version.
- Open Access Point Names. On a Pixel, go to Settings > Network & internet > SIMs, tap your Mint SIM, then tap Access point names. On a Galaxy, go to Settings > Connections > Mobile networks > Access Point Names. Searching Settings for “APN” works on most phones.
- Tap the three-dot menu, choose Reset to default, and confirm.
- Turn Wi-Fi off and load a web page. If a Mint entry is selected and the page loads, send yourself a picture message. If both work, stop here.
- Otherwise, tap + or Add. Enter Mint as the name and Wholesale as the APN, then fill in the MMSC, MMS port, APN type and protocols from the copy-ready list above.
- If your phone shows MVNO type and MVNO value, set them to GID and 756D. Leave MCC and MNC as they are.
- Tap the three-dot menu and choose Save, then tap the new Mint APN so its circle is filled in.
- Restart the phone, then test web browsing and a picture message with Wi-Fi off.
Google’s Pixel mobile network help lists Access point names under the SIMs menu, and Samsung’s US network troubleshooting page covers the APN reset on Galaxy phones.
Is Mint’s MNC 260 or 240?
It depends on your SIM, which is why the safest answer is to keep whatever MNC your phone fills in. MCC is 310 on both of Mint’s pages; only the MNC is in question. Here’s what each source actually says:
- Mint’s help center tells you not to change the MCC and MNC defaults.
- Mint’s setup page shows MCC 310 and MNC 260, with a pop-up note saying the value applies to newer SIMs, and that an older SIM whose number starts with
8901260should use 260. As written, the note repeats 260 for both cases and never names the newer value, so it doesn’t settle anything on its own. - Android’s carrier database, the carrier ID list in the Android Open Source Project, pairs the group ID 756D with two network codes: 310-240 and 310-260. (That entry is labeled Ultra/Univision; it’s Mint’s help page that ties 756D to Mint.)
Put together, a Mint SIM can report either 240 or 260. Our rule:
- If your phone has no MCC or MNC fields, do nothing. The APN editor in Android’s current source code doesn’t have them, and it ties a new APN to your SIM automatically.
- If the fields are already filled in, leave them. Your phone copied them from the SIM.
- If you have to type them, use MCC 310. For the MNC, look at the long number printed on your SIM card: use 260 if it starts with 8901260, as Mint says, and try 240 if it starts with 8901240.
Why won’t the Mint APN save, or why does it disappear?
An APN that seems to save and then isn’t in the list was most likely saved under a different network code than your SIM’s. Android’s Settings app only lists the APNs that belong to the SIM in use. In the current Settings source code, the APN list is read per SIM, and a new APN is tied to that SIM’s carrier ID or network code. Type MNC 260 on a SIM that reports 240 and the entry is stored but never shown.
The fix is to add the APN again and leave MCC and MNC alone. Some other reasons the screen won’t cooperate:
- The editor or the + button is grayed out. Android lets carriers control whether users can edit or add APNs. If the Mint settings arrived via SETUP and data works, a locked screen is fine.
- No Save option appears. On many phones Save is in the three-dot menu, not a button.
- The phone is still locked to another carrier. Mint’s bring-your-own-phone page says your phone has to be unlocked and compatible. Our guide to carrier unlocking an Android phone covers asking your old carrier.
Is there a separate Mint Mobile 5G APN?
No. Neither of Mint’s Android pages lists a 5G APN, and Wholesale carries 5G and LTE data alike. Mint’s 5G FAQ says 5G comes with every Mint plan at no extra cost, but you need a 5G-capable phone in a 5G coverage area. If you see LTE but never 5G, check Preferred network type on a Pixel (Settings > Network & internet > SIMs) or Network mode on a Galaxy (Settings > Connections > Mobile networks). A second “5G APN” only gives your phone two profiles to choose between.
Mint data or picture messages still not working?
- Restart properly. Mint’s service troubleshooting page says to turn the phone off, wait 30 seconds, and turn it back on.
- Reseat the SIM, or cycle the eSIM. Take a physical SIM out and put it back. With an eSIM, turn it off and on in Settings. Mint warns never to delete your eSIM.
- Delete leftover APNs from your old carrier, especially a T-Mobile
fast.t-mobile.comentry, and select the Mint one. - Turn off Wi-Fi calling for a test if your Wi-Fi is weak. Mint notes it can interfere with cellular service.
- Picture messages only? Check that mobile data is on, then work through our guide to MMS not working on Android, which covers Google Messages settings and size limits.
- No data at all? Our Android mobile data troubleshooting guide goes through data limits, Data Saver, Private DNS and VPNs.
- Reset network settings last. Mint puts this at the end because it clears saved Wi-Fi networks. Then contact Mint at (800) 683-7392 or mintmobile.com/chat.
Coming from T-Mobile or another carrier?
Mint runs on the T-Mobile network but publishes its own APN, so don’t reuse T-Mobile’s values. If you’re going the other way, here are our T-Mobile APN settings, and the AT&T hub above links the rest of the carriers we cover.
How we made this guide
This is a researched guide. On November 17, 2026, we compared Mint Mobile’s two Android APN pages field by field and checked Mint’s setup, network, 5G, phone compatibility and troubleshooting help pages, Google’s and Samsung’s US help pages, and Android’s open source carrier database and Settings code. We didn’t test these settings on a Mint phone for this article, so every value above is labeled with its source.
Frequently Asked Questions
Do I need to change my APN when I switch to Mint Mobile?
Often not. Many phones pick up Mint’s settings on their own, and Mint’s shortcut is to text SETUP to 6700 after activation. Type the APN in by hand only if data or picture messages still fail after that and a restart.
Will resetting the APN to default delete anything?
It removes APNs you added yourself and brings back the ones stored for your SIM. Your apps, photos, Wi-Fi networks and Bluetooth pairings aren’t touched. Resetting network settings is a separate, bigger step that does clear saved Wi-Fi networks.
Is the Mint APN “Wholesale” or “wholesale”?
Mint’s Android pages write it as Wholesale with a capital W and say the fields are case sensitive, so type it exactly that way, with no spaces.
Does Mint Mobile need a separate APN for hotspot?
Mint’s Android pages list only one APN, Wholesale, with the type default,supl,mms,ia and no hotspot entry. If web pages load on your phone but not on a tethered device, the APN is unlikely to be the cause, so contact Mint at (800) 683-7392.





